This tutorial shows you the Pre-Op Workflow and new modifications integrated within the latest Ceramill DRS update.
In this tutorial, Wibke Rosin, Ceramill DRS Product Specialist, explains the various options offered by the Ceramill Mind DRS software for creating preparation margins quickly and easily.
In this tutorial, Wibke Rosin, Ceramill DRS Product Specialist, shows you the Ceramill Mind DRS software and how to use it to design a crown quickly and easily.
In this video, Wibke Rosin, Ceramill DRS Product Specialist, explains the tools within the Ceramill Mind DRS software that are available for designing smaller restorations in greater detail.
In this tutorial, Wibke Rosin, Ceramill DRS Product Specialist, explains the nesting of the restoration within the Ceramill Mind DRS software before the data set is transferred to the milling machine.
In this video, Wibke Rosin, Ceramill DRS Product Specialist, explains the design of a single crown within the Ceramill Mind DRS software and then goes into detail about the correct placement of this work in the desired material.
In this short video, Benjamin Votteler, a longterm experienced Zolid zirconia user, shares his valuable tip within the design process for zirconia restorations.
In this video tutorial you will learn about the cost-efficient and time-saving fabrication of digital dentures within the Ceramill workflow. The milling of dental arches and denture bases with Ivoclar's Ivotion materials is available within the Ceramill system since this years software upgrade 4.1.
The evolution of digital full dentures began in 2015, when Amann Girrbach launched the first integrated and digital system for full dentures up to the try-in stage in wax. A lot has changed since then – in this live lecture recording at the #DigitalDentalShow (May 2020) Thomas Gienger, AG Course Trainer, shows you the latest advancements and the various options which the Ceramill CAD/CAM system offers today for the inhouse production of full and single jaw dentures, like 3D printing.
Filling an empty space with teeth can be a tough challenge, but tools such as the Ceramill M-Smile software module can be a massive help. Whether it is to help customers visualize the case or as a 3D planning tool to fabricate diagnostic digital wax-ups and provisionals. Alexander Wuensche, CDT, has used the software module for esthetical planning multiple times in the past. In this live lecture recording, held at the #DigitalDentalShow (May2020), the laboratory owner from Miami shows efficient ways to create highly esthetical and perfectly fitting dental prostheses based on real patient cases.
Dental photography serves as an effective tool for communication with colleagues, and as an emotional means of marketing to patients and clients regarding our clinical services and laboratory products. In this live lecture recording at the #DigitalDentalShow, Miles Cone DMD, will discuss the philosophy, equipment, and resources necessary for intraoral shade analysis, portraits, bench-top photography, and publishing outstanding high-end results with low-end consumer cost to social media and for scientific peer-review.
Benjamin Votteler, MDT, is a laboratory owner from the South of Germany and an Amann Girrbach CAD/CAM and Workflow user since Day 1! Articulators, Scanners, Softwares, Mills and CAD/CAM Material. He started using the Amann Girrbach Zirconia in 2007, Ceramill ZI, and uses the nowadays broad portfolio of the Zolid DNA zirconia every day in his lab. In this live lecture recording, held at the #DigitalDentalShow (May 2020), he shares his long-time experience with zirconia and gives insights into the right choice of zirconia, based on different clinical cases he had to solve in the past. The passionate Master Dental Technician also shows one case he already fabricated from the latest Amann Girrbach zirconia, Zolid Gen-X.
In this webinar recording (July 2018) Alexander Wünsche, CDT, (Zahntechnique, Miami) shares his gained knowledge and experience with our highly translucent zirconia Zolid HT+. On the basis of various and indications, he’s showing the versatile application range of the highly translucent material. Additionally he reveals handy tricks regarding how to add special effects to monolithic restorations.
In this webinar recording (September 2018) Peter Pizzi CDT will cover case management and diagnostic communication, the use of new technologies, as well as artistic approaches with the use of CAD software. Additionally, you will learn the importance of photographic communication and perception and material choices in today’s CAD/CAM environment.
In this webinar recording (September 2019), Peter Pizzi will cover case management and diagnostic communication, the use of new technologies such as 3D printing, as well as artistic approaches with the use of CAD software. Additionally, you will learn the importance of photographic communication and perception and material choices in today’s CAD/CAM environment.
In this webinar recording (October 2018) Moe Elbanna, Product Specialist & Trainer at Amann Girrbach North America, introduces you to the company Solvay and their high-performance polymer Ultaire TM AKP. With the Ceramill System and the high-performance polymer it is now possible to create partials completely digital. He therefore also points out the differences to the conventional fabrication process in metal and the details when it comes to the finishing adhesion, coloring etc. of this innovative material.
In this webinar recording (October 2018) Alexander Wünsche, CDT, Zahntechnique Miami, will start with the evolution of digital dentures. He then continues to explain the different available workflows on the market (BDS, FDS etc.) and how these processes look in detail. Additionally you will look into the design workflow in the CAD software, and you will get some handy tips about finishing options after milling.
In this webinar recording (November 2018) you will get a massive variety of tips & tricks when processing Zolid DNA zirconia. Amann Girrbach Trainer Richard Jentsch will share his expertise within all the different application areas of Zolid DNA zirconia – beginning with the safe approach, to the framework design, nesting, post processing before sintering or after sintering and much more. To make it easier for you – you can jump to the different chapters you’re interested in:
In this webinar recording (June 2019), Karla Rumac, CDT, from Dental Inpuls in Croatia, explains how to achieve highly esthetic results in the anterior region by using monolithic zirconia – in 3 steps.
In this short tutorial we show you the easy installation of the Ceramill Map 600 scanner.
A short introduction of the Ceramill M-Gin software module by our Course Instructor Thomas Gienger. Create implant-supported long-span bridges, Ceramill REAX, with gingiva parts easy and completely digital.
With the rollout of the Ceramill Mind software update 3.14 (Q4 2019) it is now possible to digitally design and fabricate single jaw dentures. This video shows in a brief manner the workflow and new software features. In 2015 the Ceramill Full Denture System (FDS) enabled for the first time in dentistry the digital design of full dentures in wax up to the try-in. Since the beginning of 2018 it is possible, with the integration of VITA VIONIC, to fabricate the final full denture in acrylic. With the design of single jaw dentures the development to offer integrated digital solutions for the design of denture prosthetics continues.
With the Ceramill Mind software update 3.14 it is now easier and more efficient than ever, to produce implant-supported bridges with gingiva parts.* The new features facilitate especially the design of Hybrid structures. When creating REAX (Reliable all on-x) Hybrid restorations, it is now possible to design the substructure and the individual crowns in one single workflow, without any manual rework. This video shows the highlights of the updated software version (worldwide available from Mid December 2019). *For the design of implant-supported bridges with gingiva parts the Ceramill M-Gin software module and the Ceramill M-Plant software module is needed.
With the Ceramill Mind Update 3.14 it is now possible to save up to 70% of time when creating implant-supported bridges with gingiva parts. An unparalleled variety of materials and options is provided within the Ceramill M-Gin software – it’s time to re(l)ax!
In the second episode of the series “Thomas’ CAD Clue”, Thomas Gienger, explains how to design the perfect fit between the abutment and the gingiva in the Ceramill Mind software.
Thanks to many years of experience with the Ceramill software (Ceramill Mind, Match, scan software), Thomas Gienger, Amann Girrbach course trainer, knows the software inside out. This year he shares valuable tips & tricks with you, one each month. In the first clue of this series, he shows one of the latest features of the Ceramill Map 600 scanner, the full jaw impression scanning.