Thu. 27 July 2023, 12:00 AM
Zolid Bion – a new generation of raw materials
Axel Reichert Amann Girrbach
Melanie Röschmann Amann Girrbach
Wed. 26 April 2023, 12:00 AM
Digitization puts all stakeholders on an equal footing
Dr. Cyrus Alamouti
MDT Sina Moghadam
Thu. 27 July 2023, 12:00 AM
Zolid Bion – a new generation of raw materialsThe new development by Amann Girrbach and Tosoh not only impresses with its uncompromising esthetics and strength, but also with its possibility of sintering in just 45 minutes. In this article, B. Eng. Axel Reichert and BSc Melanie Röschmann explain why this does not compromise the material in terms of safety and beauty.
Axel Reichert Amann Girrbach
Melanie Röschmann Amann Girrbach
Thu. 16 December 2021, 12:00 AM
Stay close to natureFramework design with natural anatomies for full arch monolithic restorations by using Zolid HT+.
Alfonso Blanco Pose
Wed. 8 December 2021, 8:13 AM
Ultimate 25mm. Zolid Gen-X blank - the answer to implant-supported restorations with gingiva componentRelevance: Polychromatic (pre-stained) zirconia materials, shade concept
Axel Reichert Amann Girrbach
Mon. 15 November 2021, 12:00 AM
The new Ceramill A-LineAn interview with Dipl. Ing. (FH) Axel Reichert & B.Sc. Melanie Röschmann on the new PMMA portfolio.
Melanie Röschmann Amann Girrbach
Axel Reichert Amann Girrbach
Tue. 27 April 2021, 3:00 PM
The influence of the zirconia sintering temperature on its color shadeThe signficance of maintaining the sintering temperature for zirconia is meanwhile suficiently well established with regard to the influence on strength and translucency.
Falko Noack Amann Girrbach
Tue. 27 April 2021, 2:00 PM
Emotional DentistryDentistry today, is not just repairing cavities or replacing missing teeth with restorations. In our modern society, modern dentistry is more and more an active part of our esthetic comfort feeling.
Alexander Wünsche Zahntechnique Inc.
Tue. 27 April 2021, 12:00 PM
A powerful teamClose teamwork, optimum preparation and the use of highly esthetic zirconia materials for a successful treatment concept.
MDT Benjamin Votteler Votteler Dentaltechnik
Dr. med. dent. Michael Fischer
Tue. 27 April 2021, 11:00 AM
Material-dependent clasp design of partial dentures – differences between Ultaire® AKP and partial denture alloysRemovable dentures made of high performance polymer.
Lars Jessler Amann Girrbach
Tue. 27 April 2021, 10:00 AM
Zolid FX Multilayer Zirconium Blocks - 9 in one swoopThe polychrome, ultra-highly translucent zirconium oxide Zolid FX Multilayer with integrated color and translucency gradients is also available in block form. In this article, MDT Benjamin Votteler, Votteler Dentaltechnik GmbH, reveals the advantages he derives from the material and in particular, from the latest released blank shape, for his everyday work.
MDT Benjamin Votteler Votteler Dentaltechnik
Tue. 27 April 2021, 9:00 AM
Zolid Zirconia – Dental dreams are made of thisZirconia (ZrO2) forms the ideal basis for all-ceramic restorations as this material has outstanding properties that can hardly be matched by any other material. With Zolid, Amann Girrbach provides a comprehensive all-ceramic system for high-quality and esthetic zirconia restorations.
Prof. Dr. Dipl. Ing (FH) Bogna Stawarczyk
Tue. 27 April 2021, 8:00 AM
Full Restoration with Zolid FXA successful concept for sophisticated prosthetics.
Joachim Maier Joachim Maier Dental Design
Thu. 22 April 2021, 1:58 PM
Strength ≠ StrengthThis months’ blog entry by our Head of R&D Falko Noack takes an excursus into material science. Particularly he points out the meaning of material flexural strength and what essentially has to be taken into account when comparing this characteristic.
Falko Noack Amann Girrbach