In this zirconia clue by Benjamin Votteler, MDT from Dentaltechnik Votteler in Germany, gives valuable tips for coloring bridges of un-sintered zirconia after processing. #NoSupriseZirconia

Benjamin Votteler Dentaltechnik Votteler

In this tutorial, Wibke Rosin, Ceramill DRS Product Specialist, explains the various options offered by the Ceramill Mind DRS software for creating preparation margins quickly and easily.

Using a model scan, Wibke Rosin, Ceramill DRS Product Specialist, explains in this tutorial the viewing and checking options of a scan, the subsequent design and the fabrication with the Ceramill Motion DRS milling machine.

In this short video, Wibke Rosin, Ceramill DRS Product Specialist, explains the nesting of a crown in the desired material and how the data is transmitted to the Ceramill Motion DRS milling machine.

The cloud-based solution AG.Live enables simple and fast data exchange of cases between practice and laboratory. Wibke Rosin, Ceramill DRS product specialist, explains exactly how this works in this short video.

In this short video, Wibke Rosin explains what is important for intraoral scanning and what needs to be taken into account when scanning on the patient using the Ceramill Map DRS scanner.

Wibke Rosin, Ceramill DRS Product Specialist, provides insights into our cloud-based solution for collaboration between practice and lab in this short video.

Ceramill DRS enables structured patient care and digital, interdisciplinary collaboration between practice and laboratory - our product Ceramill DRS product specialist Wibke Rosin, explains exactly how this works. Thanks to its division into three different kits, this solution offers maximum flexibility.

Dieses Mal gibt dir Benjamin Votteler von Dentaltechnik Votteler nützliche Tipps für die Bearbeitung von ungesintertem Zirkoniumdioxid nach dem Fräsen.

Benjamin Votteler Dentaltechnik Votteler

In this zirconia clue by Benjamin Votteler, MDT from Dentaltechnik Votteler in Germany, you'll get some tips about how to separate restorations carefully from the blank and what tools are used best. #NoSurpriseZirconia

Benjamin Votteler Dentaltechnik Votteler

In this zirconia clue by Benjamin Votteler, MDT from Dentaltechnik Votteler, you’ll get some nice tips concerning the nesting of restorations. Watch now and benefit from a real dental expert. #NoSurpriseZirconia

Benjamin Votteler Dentaltechnik Votteler

Perry J. Carroll, CDT (Perry’s Dental Lab, Fitzgerald) and Richard Jentsch (Amanngirrbach North America) dive deep into the world of Ceramill Sintron in this webinar recording (June 2018). Besides material parameters and possible application range, Perry Carroll shares his experience and tips about the handling and usage of the dry millable CoCr sintering metal.

This tutorial shows you how to clean the water tank of the Ceramill Motion DRS mill.

This tutorial shows you how to calibrate the Ceramill Motion DRS mill.

This tutorial shows how to mount the splitex plate sets into Artex articulators of the C series (CR, CT, CPR) in order to commonalise them.

This tutorial shows how to change the filter cartridge of the Ceramill Matik.

This tutorial shows you how to change the filter fleece within the cleaning unit of the Ceramill Matik.

This tutorial shows you how to check the coolant within the thank of the Ceramill Matik.

This tutorial shows you how to clean and lubricate the collet of the Ceramill Matik.

Highly translucent, integrated color and translucency gradient and 1000 MPa bending strength – that’s what makes our latest zirconia Zolid Gen-X unbeatable and a true all-rounder – from single crowns to 14-unit bridges, everything is possible. In this webinar recording (March 2020) Richard Jentsch, Product specialist and Trainer at Amann Girrbach North America, introduces you to this universal zirconia.

The evolution of digital full dentures began in 2015, when Amann Girrbach launched the first integrated and digital system for full dentures up to the try-in stage in wax. A lot has changed since then – in this live lecture recording at the #DigitalDentalShow (May 2020) Thomas Gienger, AG Course Trainer, shows you the latest advancements and the various options which the Ceramill CAD/CAM system offers today for the inhouse production of full and single jaw dentures, like 3D printing.

Thomas Gienger Amann Girrbach

Dietmar Schaan Amann Girrbach

Filling an empty space with teeth can be a tough challenge, but tools such as the Ceramill M-Smile software module can be a massive help. Whether it is to help customers visualize the case or as a 3D planning tool to fabricate diagnostic digital wax-ups and provisionals. Alexander Wuensche, CDT, has used the software module for esthetical planning multiple times in the past. In this live lecture recording, held at the #DigitalDentalShow (May2020), the laboratory owner from Miami shows efficient ways to create highly esthetical and perfectly fitting dental prostheses based on real patient cases.

Alexander Wünsche Zahntechnique Inc.

Benjamin Votteler, MDT, is a laboratory owner from the South of Germany and an Amann Girrbach CAD/CAM and Workflow user since Day 1! Articulators, Scanners, Softwares, Mills and CAD/CAM Material. He started using the Amann Girrbach Zirconia in 2007, Ceramill ZI, and uses the nowadays broad portfolio of the Zolid DNA zirconia every day in his lab. In this live lecture recording, held at the #DigitalDentalShow (May 2020), he shares his long-time experience with zirconia and gives insights into the right choice of zirconia, based on different clinical cases he had to solve in the past. The passionate Master Dental Technician also shows one case he already fabricated from the latest Amann Girrbach zirconia, Zolid Gen-X.

Benjamin Votteler Dentaltechnik Votteler

This tutorial explains how to take position registrations (protrusion and lateral bites) in order to determine the individual patient data and thus to be able to set them later in the Artex CR articulator.

In this webinar recording (September 2019), Peter Pizzi will cover case management and diagnostic communication, the use of new technologies such as 3D printing, as well as artistic approaches with the use of CAD software. Additionally, you will learn the importance of photographic communication and perception and material choices in today’s CAD/CAM environment.

Peter Pizzi CDT, MDT

In this webinar recording (October 2018) Alexander Wünsche, CDT, Zahntechnique Miami, will start with the evolution of digital dentures. He then continues to explain the different available workflows on the market (BDS, FDS etc.) and how these processes look in detail. Additionally you will look into the design workflow in the CAD software, and you will get some handy tips about finishing options after milling.

Alexander Wünsche Zahntechnique Inc.

In this webinar recording (November 2018) you will get a massive variety of tips & tricks when processing Zolid DNA zirconia. Amann Girrbach Trainer Richard Jentsch will share his expertise within all the different application areas of Zolid DNA zirconia – beginning with the safe approach, to the framework design, nesting, post processing before sintering or after sintering and much more. To make it easier for you – you can jump to the different chapters you’re interested in:

Benjamin Votteler, MDT, solves about 80% of the cases in his laboratory with ceramics (zirconia & pressable ceramics mainly). In this webinar recording (June 2019) he shows the broad versatility and combineability of Zolid zirconia based on 6 patient cases he did in the past and solved with the zirconia from Amann Girrbach. From single tooth restorations to long-span bridges.

Benjamin Votteler Dentaltechnik Votteler

Lucas T. Lammott runs a one-man laboratory in the USA, Massachusetts. Good teamwork, the right material and products – all these are factors for a successful outcome. What success means to him along the production phase of a dental restoration, he describes in detail based on a patient case he did – step-by-step from the model to the final result. Webinar recording from July 2019.

Lucas Lammott CDT

After sintering, Zolid restorations can be further refined and individualized by applying veneering ceramics or stains. The choice of the right aids is decisive for success.

CDT Barbara Wetzel AG Trainer

As a certified dental technician and as a practicing prosthodontist, Miles Cone, DMD, knows both sides for a successful collaboration. Based on his experiences in both professions, he shares his favorite five tips for dentist and dental technicians, which can help to improve the collaboration and ultimately contribute to deliver predictable, high-quality restorations. Webinar recording from October 2019.

Miles Cone Nuance Dental

It’s been already 5 years since our dry millable CoCr sintering metal has been on the market – the success story continues. For all those of you how haven’t heard about the revolutionary material, our trainer and expert Thomas Gienger shares insights into the material and success stories from different laboratories all over the world, already using the metal. Webinar recording, May 2018.

Thomas Gienger Amann Girrbach

In this webinar recording (September 2018) Peter Pizzi CDT will cover case management and diagnostic communication, the use of new technologies, as well as artistic approaches with the use of CAD software. Additionally, you will learn the importance of photographic communication and perception and material choices in today’s CAD/CAM environment.

Peter Pizzi CDT, MDT

This short tutorial shows the use of the preparation tools of the Zolid Preparation Dent Kit, with which stumps can be optimally prepared for CAD/CAM-manufactured zirconia dental prosthesis.The Zolid Preparation Dent Kit was created in cooperation with Dr. Michael Fischer and Benjamin Votteler, MDT, and is adapted to the Ceramill CAD/CAM workflow.

Benjamin Votteler Dentaltechnik Votteler

Dr. med. dent. Michael Fischer

This short tutorial shows the use of the preparation tools of the Zolid Preparation Dent Kit, with which stumps can be optimally prepared for CAD/CAM-manufactured zirconia dental prosthesis. The Zolid Preparation Dent Kit was created in cooperation with Dr. Michael Fischer and Benjamin Votteler, MDT, and is adapted to the Ceramill CAD/CAM workflow.

Benjamin Votteler Dentaltechnik Votteler

Dr. med. dent. Michael Fischer

This short tutorial shows the specially developed tools for high-gloss polishing of zirconium oxide restorations in the patient's mouth.

This staining method can be used for all white zirconias. In this tutorial, the work steps are illustrated using a Zolid HT+ White crown.

This staining method is ideally suited for simple and fast monochrome staining of Zolid restorations which are subsequently veneered.

Short workflow tutorial about the basic bite registration with the digital facebow Zebris for Ceramill.

A short introduction of the Ceramill M-Gin software module by our Course Instructor Thomas Gienger. Create implant-supported long-span bridges, Ceramill REAX, with gingiva parts easy and completely digital.

Thomas Gienger Amann Girrbach

With the rollout of the Ceramill Mind software update 3.14 (Q4 2019) it is now possible to digitally design and fabricate single jaw dentures. This video shows in a brief manner the workflow and new software features. In 2015 the Ceramill Full Denture System (FDS) enabled for the first time in dentistry the digital design of full dentures in wax up to the try-in. Since the beginning of 2018 it is possible, with the integration of VITA VIONIC, to fabricate the final full denture in acrylic. With the design of single jaw dentures the development to offer integrated digital solutions for the design of denture prosthetics continues.

With the Ceramill Mind software update 3.14 it is now easier and more efficient than ever, to produce implant-supported bridges with gingiva parts.* The new features facilitate especially the design of Hybrid structures. When creating REAX (Reliable all on-x) Hybrid restorations, it is now possible to design the substructure and the individual crowns in one single workflow, without any manual rework. This video shows the highlights of the updated software version (worldwide available from Mid December 2019). *For the design of implant-supported bridges with gingiva parts the Ceramill M-Gin software module and the Ceramill M-Plant software module is needed.

With the Ceramill Mind Update 3.14 it is now possible to save up to 70% of time when creating implant-supported bridges with gingiva parts. An unparalleled variety of materials and options is provided within the Ceramill M-Gin software – it’s time to re(l)ax!

Thanks to many years of experience with the Ceramill software (Ceramill Mind, Match, scan software), Thomas Gienger, Amann Girrbach course trainer, knows the software inside out. This year he shares valuable tips & tricks with you, one each month. In the first clue of this series, he shows one of the latest features of the Ceramill Map 600 scanner, the full jaw impression scanning.

Thomas Gienger Amann Girrbach

Amann Girrbach Trainer CDT Barbara Wetzel shows you a simple staining technique, which enables you to achieve all 16 VITA shades, based on only 7 blank shades using the Ceramill Stain&Glaze or Essentials Kit. In this video tutorial the staining concept is exemplarily illustrated with a lighter (A1 to A2) and a darker (B2 to B4) shade. It can be of course extended to all shades according to shade assignment table, integrated in the Zolid shade guide – we therefore recommend to use this tutorial together with the guide, which can be downloaded at: https://www.amanngirrbach.com/zolid-stainingtechnique Three different techniques are shown – according to the esthetic requirements and desired individuality: - Basic Esthetics – Staining with dentin shades - Medium Esthetics – Staining with dentin shades & effect materials - High Esthetics – Cut-back and veneering

CDT Barbara Wetzel AG Trainer

Dental photography serves as an effective tool for communication with colleagues, and as an emotional means of marketing to patients and clients regarding our clinical services and laboratory products.

Miles Cone Nuance Dental